| - Diagram 1 : Bad placement, cams will flip over and permanent damage. |
|
| - Diagram 2 : Sharp edge reduces strength or permanent damage cams. |
|
|
- Diagram 3 : The cams reducing adverse torque on the stem. There is chance to slide out of the crack. |
|
| - Diagram 4 : Cams should always be place at 55 % between 95% closure. |
|
| - Diagram 5 : GS CMAS require having large round support to replacement on the horizontal cracks. |
|
| - Diagram 6 : Cams should be replace about 20 degree from vertical wall. |
|
| Storage : Cams should be store dry, well vented dry area and place away from corrosives material. |
|
| Cleaning : Cams should be cleaned using warm water and light soap, rinse and dry at well ventilated area. |
|
| Lubrication : Apply dry slide lubrication and fully dry before use cams. |
|
| Limited Warranty : Warranty for one yea from purchase date. Keep original receipt from Retailer.
Our cams are free from defect material and workmanship. Remember one year warranty period, all such liability shall terminate. |
|
Warranty Exclusion : No warranty products normal wear tear, improper use and modification
|
